Create a Stylish Hairpin Legs Table with Ease

DIY hairpin legs are a staple of the mid-century modern aesthetic, and they're easy to come across at a variety of internet merchants. Learn how to make one of these easy projects that only demand a few supplies and a few hours of your time.

Construct a basic desk

A desk does not have to be a difficult job to complete. If you just need a basic writing desk, this table can be put together in an afternoon by any novice. First, choose your legs. Hairpin legs are often made out of two or three rods, with three rods being utilized for bigger things such as desks or dining tables for more stability.

Because the normal desk height is 28′′-30′′, pick your leg size appropriately, however, keep in mind that this project may be entirely tailored to your needs. A simple tabletop may be made out of a piece of plywood cut to size and stained. Simply use an iron-on veneer in a complementing material to cover the plywood's bare edges.

Make a Bench

An upholstered bench like this made with a set of 16′′ hairpin legs is the most stylish project you can make with hairpin legs. To get the effect, cut a piece of plywood to the desired size and use spray glue to connect a piece of 4′′ high-density foam. Wrap a piece of batting over the whole item, lightly attaching it to the plywood's bottom on all four sides.

Before wrapping the fabric around the seat and stapling it below, make sure the design is lined up precisely where you want it to be. Upholstery fabric is great for a job like this because of its longevity. Finally, before anchoring the hairpin legs with screws, mark out a location for each of them, ensuring that they are the same distance away from the edges on each corner.

Provide a Perch for Plants

An old tree stump and a little pair of hairpin legs are all you need to build this organic planter. You'll need a drill, chisel, and jigsaw to hollow out a comparable piece of wood if you can find one. To begin, use a jigsaw to cut a circle around the perimeter. You may use a boring bit to gently cut away tiny chunks of the stump, then manually eject any residual fragments using a chisel.

You may coat the interior of the planter with an exterior-grade urethane finish and drill a drainage hole to prevent water from accumulating inside when the aperture is six inches deep. It is raised above the ground by three hairpin legs.

Make a Coffee Table Out of Recycled Materials

You may use an old shutter as a top for their DIY coffee table, continuing the theme of reused materials. Cleaning the wood, removing the fasteners if desired, and mounting the hairpin legs beneath are all that are required for this project. You may also use an old door that has been chopped down to size.

Make a Nightstand Out of a Wine Crate

This nightstand's enormous hairpin legs and papered back are fresh, creative, and budget-friendly. You may make two shelves for your kid’s books, tablets, and other possessions by simply using the lid of a wine box. The top shelf is supported by four screws pushed halfway into the crate's internal walls, while the bottom "lip" is held in place by the front pair of hairpin legs.

The container looks aged with black wax, but it may also be stained; simply seal it to prevent it from water spillage. Line the back of the crate with wallpaper or even fabric remnants to create a pop of color and design. To secure them, use a spray adhesive and a credit card to smooth away any air bubbles as you go.